|
|
| Abanda, Henry |
An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon |
| Abanda, Henry |
Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction |
| Abbas, Ali |
Numerical modeling of fibre-reinforced concrete |
| Abd Rahman, Norashidah |
The face bending behaviour of concrete filled structural hollow sections |
| Abdalla, Jamal A. |
Energy-based predictions of number of reversals to fatigue failure of steel bars using artificial neural network |
| Abdel-Magid, Hisham I.M. |
Hydrologic analysis of digital elevation models using archydro extension |
| Abdullah, A A Abang |
Coupling parallel buildings by supplemental viscous damper device |
| Abido, Mohammad |
Multiobjective evolutionary finance-based scheduling: the entire projects' portfolio |
| Abolghasemzadeh, Puyan |
BIM-based immersive indoor graph networks for emergency situations in buildings |
| Abu-Dagga, Khader |
Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates |
| Adamo-Villani , Nicoletta |
Virtual Reality for learning construction surveying |
| Agdas, Duzgun |
Parametric modeling in transportation construction |
| Agdas, Duzgun |
IT in transportation construction: opportunities and barriers to implementation |
| Ahangar-Asr, Alireza |
Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model |
| Ahangar-Asr, Alireza |
An evolutionary numerical approach to modelling the mechanical properties of rubber concrete |
| Ahmad AL-Hadad, Botan |
A genetic algorithm approach to highway alignment development |
| Ahmad AL-Hadad, Botan |
Using genetic algorithms to assist in the design of a water distribution network |
| Ahmed, Ammar |
Model-based estimation of rooms’ energy consumption in building with renewable energy sources |
| Ahmed, Ammar |
Building performance analysis based on modelling and simulation |
| Ahn, Changbum |
Enhanced estimation of air emissions from construction operations based on discrete-event simulation |
| Ahn, Seungjun |
Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM |
| Ai, Chengbo |
Simulating port logistics operations using 3D visualization technology |
| Ailland, Karin |
A daily significant data basis for construction process simulation |
| Akcamete, Asli |
Potential utilization of building information models for planning maintenance activities |
| Akcamete, Asli |
Analysis of three indoor localization technologies to support facility management field activities |
| Akcay, Caner |
A model-based and RFID integrated approach to streamline component information flow in construction projects |
| Akin, Omer |
A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing |
| Akin, Omer |
Requirements for a computerized approach to plan sensor placement in the HVAC systems |
| Akinci, Burcu |
Potential utilization of building information models for planning maintenance activities |
| Akinci, Burcu |
A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing |
| Akinci, Burcu |
Evaluation of toolkits for visualizing information about performance of earthwork activities on a construction job site |
| Akinci, Burcu |
Requirements for a computerized approach to plan sensor placement in the HVAC systems |
| Akinci, Burcu |
An approach for fusing data from multiple sources to support construction productivity monitoring |
| Akinci, Burcu |
Analysis of three indoor localization technologies to support facility management field activities |
| Akula, Manu |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Akyildiz, Sercan |
Development of network-level linear programming optimization for pavement maintenance programming |
| AL Qady, Mohammed |
Contractual document process model for document management |
| Al-Bazi, Ammar |
Simulation modelling and multi-layer genetic algorithms to identify optimal crew allocation in the precast industry. |
| Al-enezi, Mohammad |
Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure |
| Al-Hussein, Mohamed |
Automation in drafting and design for modular construction manufacturing utilizing 2D CAD and parametric modeling |
| Al-Jabri, Khalifa |
A new formulation for rotation of bare-steel joints at elevated temperatures using genetic programming |
| Al-jibouri, Saad |
A process-based framework for modelling risk-related failure costs in construction |
| Al-jibouri, Saad |
A computer model for assessing project risks and occurrence of failure costs |
| Al-jibouri, Saad |
Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives |
| AlBahnasi, Homam |
Improving construction safety through real-time motion planning of cranes |
| Alel, M |
Gains and losses of information when collaborating remotely over a network communication in the construction industry |
| Allan, Luke |
Using artificial intelligence to deliver optimised energy consumption |
| Almansour, H.H. |
Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques |
| Alshawi, Mustafa |
Achieving IT-based sustainable competitive advantage in construction: organisational soft issues |
| Alshawi, Mustafa |
Strategic positioning of IT in construction: the way forward |
| Alwisy, Aladdin |
Automation in drafting and design for modular construction manufacturing utilizing 2D CAD and parametric modeling |
| Aly, Mohamed |
A simplified model for the interactive generation of architectural space layout |
| Amor, Robert |
Technical challenges for integrated design and delivery solutions in civil and building engineering |
| Ang, Kok Keng |
Buckling of defective carbon nanotube |
| Annisimov, Yuri |
Input-output impact risk propagation in critical infrastructure interdependency |
| Anttila, Teemu |
Integration of joint design of steel structures using product model |
| Anumba, Chimay |
The virtual construction simulator - development of an educational simulation game |
| Anumba, Chimay |
An integrated requirements management system for construction projects |
| Anumba, Chimay |
The multi agent paradigm and organizational abstractions in construction e-business |
| Arayici, Yusuf |
The key performance indicators of the BIM implementation process |
| Arboleda, Carlos |
The calculation of optimal premium in pricing ADR as an insurance product |
| Arciszewski, Tomasz |
Successful education: the key to engineering creativity |
| Arnold, Nicolas |
Process oriented model based information exchange between architecture and fabrication in early project phases |
| Ash, Elena |
Remote sensing technologies for infrastructure management: Russian experience |
| Ashour, Ashraf |
Neural network modelling of reinforced concrete beam shear capacity |
| Atasoy, Guzide |
Evaluation of toolkits for visualizing information about performance of earthwork activities on a construction job site |
| Atay, Hasan |
GIS based decision support system for health and safety management in linear projects |
| Au, Francis T.K. |
A general finite strip for the analysis of folded plates |
| Au, Francis T.K. |
Effects of long-term time-dependent behaviour on dynamic properties of cable-stayed bridges |
| Auersch, Lutz |
Vibration of buildings on pile groups due to railway traffic – finite-element boundary-element, approximating and prediction methods |
| Avendano Castillo, Jimmy |
A process-based framework for modelling risk-related failure costs in construction |
| Avendano Castillo, Jimmy |
A computer model for assessing project risks and occurrence of failure costs |
| Avendano Castillo, Jimmy |
Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives |
| Ayres Filho, Cervantes |
Building design teamwork supported by a collaborative CAD modeling process analysis |
| Ayres Filho, Cervantes |
A modeling level-oriented approach for Building Information Modeling |
| Azuma, Fabiola |
Building design teamwork supported by a collaborative CAD modeling process analysis |
|
|
| Babenko, Liya |
GIS and territorial planning |
| Bagchi, Ashutosh |
Design criteria of wireless sensors in structural health monitoring systems |
| Bajat, Branislav |
Topic specific search engines in civil engineering |
| Baldwin, Andrew N |
An integrated requirements management system for construction projects |
| Barakat, Samer |
Shuffled complex evolution optimizer for truss structure optimization |
| Barakat, Samer |
Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates |
| Bargstädt, Hans-Joachim |
A daily significant data basis for construction process simulation |
| Barison, Maria Bernardete |
An overview of BIM specialists |
| Barison, Maria Bernardete |
BIM teaching strategies: an overview of the current approaches |
| Barthrope, Stephen |
A Survey of the current state of e-commerce usage in the taiwanese architect, engineering and construction industry |
| Beber, Michele |
Building design teamwork supported by a collaborative CAD modeling process analysis |
| Becerik-Gerber, Burcin |
Exploring the use of wireless sensor networks in building management |
| Beck, Richard |
Climate change risks in decision-making in building design and facilities management |
| Becker, Adib |
Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems |
| Bel Hadj Ali, Nizar |
Self-repair of a tensegrity pedestrian bridge through grouped actuation |
| Bennett , Lloyd |
An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas |
| Bennett, Terry |
The future of design and construction processes – what owners will be looking for as they rebuild failing infrastructure |
| Berges, Mario |
Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms |
| Beucke, Karl |
Object versioning as a basis for design change management within a BIM context |
| Beucke, Karl |
An integrative approach for using multidisciplinary design optimization in AEC |
| Bewick, T |
A new method for very fast simulation of blast wave propagation in complex built environments |
| Bilchuk, Irina |
The identification dilemma of computational geometry |
| Birgonul, M. Talat |
Using Multi Agent Systems in Construction Claim Negotiation |
| Bisani, Mayur |
Optimization of highway construction work zones: the agency and user cost tradeoff |
| Bish, Doug |
Development of network-level linear programming optimization for pavement maintenance programming |
| Böhms, Michel |
IFC-based clash detection for the open-source BIMserver |
| Borenstein, Johann |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Borrell, Adam |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Borrmann, André |
Mathematical modeling of earthwork optimization problems |
| Bouchlaghem, Dino |
Developing a corporate information architecture: a case study |
| Bouchlaghem, Dino |
An evaluation of the fire safety emergency cover toolkit |
| Bouchlaghem, Dino |
People flow modelling in building design |
| Breit, Manfred |
Process oriented model based information exchange between architecture and fabrication in early project phases |
| Brilakis, Ioannis |
Visual recognition and assessment of concrete crack properties |
| Brocklehurst , David |
People flow modelling in building design |
| Brown, Chris |
Monitoring the deflections of bridges in the UK by GPS |
| Bull, Chris |
Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure |
| Burillo, Mateo |
Predicting the desired thermal comfort conditions for shared offices |
|
|
| Cahill, Brian |
Integration of radio frequency identification and building information modelling for decentralised information management |
| Cahill, Brian |
Using artificial intelligence to deliver optimised energy consumption |
| Caldas, Carlos |
A computer vision and reasoning based video interpretation system for rapid productivity analysis of construction operations |
| Calis, Gulben |
A comparative study for layout planning of temporary construction facilities: optimization by using ant colony algorithms |
| Carr, Jim |
Ultrasonic sensor + 4D virtual reality simulation environment for safety training |
| Carvalho, Isabel |
Engaging learners inside and outside the classroom |
| Cevik, Abdulkadir |
A new formulation for rotation of bare-steel joints at elevated temperatures using genetic programming |
| Chan, Andrew |
Fuzziness and randomness ‘a hybrid approach’ to risk management |
| Chan, Ben Y. B. |
An integrated finite strip solution for dynamic analysis of long span bridges |
| Chan, Ben Y. B. |
Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques |
| Chang, Chia-Feng |
Applying artificial neural networks to estimate the amount of chlorine in air |
| Chang, Chih-chian |
System development and performance evaluation of track intrusion in Taipei MRT system |
| Chang, Wei-Tsang |
Representational programming for design analysis |
| Charnwasununth, Phatsaphan |
Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system |
| Che, Linjing |
Using building information modeling for measuring the efficiency of building energy performance |
| Chen, Albert |
Automation for construction equipment request and deployment for emergency response |
| Chen, Chine-Ta |
Pavement distress image recognition using k-means and classification algorithms |
| Chen, Don |
Using building information modeling for measuring the efficiency of building energy performance |
| Chen, Hao |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Chen, Hung-Ming |
A video game-based training mode for decision making in construction project control and management |
| Chen, Jun |
Research on collapse simulation of Dixituojiang bridge |
| Chen, Yi |
SimuSurvey X : an improved virtual surveying instrument running off a game engine |
| Chen, Yixing |
Towards intelligent building systems: evaluating user acceptance of automatic control |
| Chen, Yu-sheng |
Applying artificial neural networks to estimate the amount of chlorine in air |
| Cheng, Jack C.P. |
Cloud computing and its implications for construction IT |
| Cheng, Jack C.P. |
Web-enabled model-based CAD for design |
| Cheng, Shaohong |
Nonlinear RC beam element model under combined action of axial compression, bending and shear |
| Cheng, Shaohong |
Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns |
| Cheung, Franco |
Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle |
| Cheung, Franco |
Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction |
| Cheung, Moe M. S. |
An integrated finite strip solution for dynamic analysis of long span bridges |
| Cheung, Moe M. S. |
Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques |
| Cheung, Y.K. |
A general finite strip for the analysis of folded plates |
| Chi, Nai-Wen |
On effective passage partitioning for information retrieval on domain-specific technical reports |
| Chien, Hung-Ju |
A Survey of the current state of e-commerce usage in the taiwanese architect, engineering and construction industry |
| Chiurugwi, Tinashe |
Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment |
| Chou, Chien-Cheng |
Development of an online exam platform for the programming language course: ontology-based approach |
| Chou, Chien-Cheng |
Pavement distress image recognition using k-means and classification algorithms |
| Chou, Jui-Sheng |
Lessons learned from a collapsed wind turbine tower in Taiwan |
| Christodoulou, Symeon |
An entropy-based method for resource levelling |
| Chuang, Shih-Kun |
SimuSurvey X : an improved virtual surveying instrument running off a game engine |
| Coates, Paul |
The key performance indicators of the BIM implementation process |
| Cong, Zixiang |
Building performance analysis based on modelling and simulation |
| Cong, ZiXiang |
Integration of radio frequency identification and building information modelling for decentralised information management |
| Cory, Clark |
Impact of gaming application use in construction engineering education |
| Cory, Clark |
Evolution of a construction graphics course for engineering education |
| Cotsovos, Demetrios |
Numerical modeling of fibre-reinforced concrete |
| Courtier, Rodolphe |
Cross-disciplinary AEC teamwork supported by re-representation |
| Crawford, Wesley |
Virtual Reality for learning construction surveying |
| Crosbie, Tracey |
Energy profiling: supporting performance based approaches in sustainable building design |
| Crosbie, Tracey |
Cost effective refurbishment approach to achieve energy efficient building: a primary school case study |
| Cus Babic, Nenad |
InPro training environment – training platform for BIM based collaborative working |
|
|
| Dai, Fei |
Evaluation of photogrammetry for monitoring settlement of building adjacent to foundation jobsite |
| Dalili Shoaei, Mohammad |
Coupling parallel buildings by supplemental viscous damper device |
| Dawood, Nashwan |
Energy profiling: supporting performance based approaches in sustainable building design |
| Dawood, Nashwan |
Cost effective refurbishment approach to achieve energy efficient building: a primary school case study |
| Dawood, Nashwan |
Application of 3D terrain representation system for highway landscape design |
| Dawood, Nashwan |
Simulation modelling and multi-layer genetic algorithms to identify optimal crew allocation in the precast industry. |
| Dawood, Nashwan |
Development of a workspace conflict verification model for temporary facilities based on a VR simulation |
| Dawood, Saad |
Energy profiling: supporting performance based approaches in sustainable building design |
| de la Garza, Jesus |
Development of network-level linear programming optimization for pavement maintenance programming |
| de Wilde, Pieter |
Intelligent computing for the design of high performance buildings |
| de Wilde, Pieter |
Climate change risks in decision-making in building design and facilities management |
| Dean, John |
Cost effective refurbishment approach to achieve energy efficient building: a primary school case study |
| Demian, Peter |
An integrated requirements management system for construction projects |
| Demir, Salih |
A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing |
| Diao, Bo |
Durability evaluation software system of concrete structure based on BIM and 4D technology |
| Diao, Bo |
Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns |
| Diao, Bo |
Nonlinear RC beam element model under combined action of axial compression, bending and shear |
| Dib, Hazar |
Impact of gaming application use in construction engineering education |
| Dib, Hazar |
Evolution of a construction graphics course for engineering education |
| Dib, Hazar |
Virtual Reality for learning construction surveying |
| Dibley, Michael |
The application of intelligent agency in a software model for buildings |
| Dikmen, Irem |
Using Multi Agent Systems in Construction Claim Negotiation |
| Dinan, J |
A new method for very fast simulation of blast wave propagation in complex built environments |
| Dong, Suyang |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Du, Yongfeng |
Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes |
|
|
| East, E. William |
Analysis of three indoor localization technologies to support facility management field activities |
| East, E. William |
Analysis of life-cycle information exchange |
| El-Anwar, Omar |
Multi-objective optimization of process design using process-based sustainable impact analysis |
| El-Cheikh, Marwa |
Fuzziness and randomness ‘a hybrid approach’ to risk management |
| El-Gohary, Nora |
Towards a formal axiology for sustainable infrastructure development |
| El-Hamalawi, Ashraf |
Developing a corporate information architecture: a case study |
| Elamin, Ahmed |
The face bending behaviour of concrete filled structural hollow sections |
| Elazouni, Ashraf |
Multiobjective evolutionary finance-based scheduling: the entire projects' portfolio |
| Ellinas, Georgios |
An entropy-based method for resource levelling |
| Ellis, Ralph D. |
Parametric modeling in transportation construction |
| Ellis, Ralph D. |
IT in transportation construction: opportunities and barriers to implementation |
| Endy, Drew |
NanoBuild – concepts and requirements of nano-to-meter scale build |
| Erbas, Irem |
Description of a methodology for decision support for energy efficient housing redesign |
| Ergen, Esin |
A model-based and RFID integrated approach to streamline component information flow in construction projects |
| Ergen, Esin |
GIS based decision support system for health and safety management in linear projects |
| Erlemann, Kai |
Simulation of construction processes considering spatial constraints of crane operations |
|
|
| Fahdah, Ibrahim |
Practical software design for engineering application development |
| Fan, Su-Ling |
Experiences using building information modeling for a construction project |
| Faramarzi, Asaad |
An evolutionary numerical approach to modelling the mechanical properties of rubber concrete |
| Faramarzi, Asaad |
Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model |
| Faschingbauer, Gerald |
Semi-automation of logical decisions in monitoring procedures to realize adaptive geotechnical construction methods |
| Fekry, Ahmed |
Integration of daylighting simulation software in architectural education |
| Fendi, Karwan |
Using genetic algorithms to assist in the design of a water distribution network |
| Fidan, Gulsah |
Using Multi Agent Systems in Construction Claim Negotiation |
| Firmenich, Berthold |
Experiences from the application of processing-oriented building information in a CAD-based environment |
| Firmenich, Berthold |
Formalisation and assessment of data structure based coupling in distributed civil engineering applications |
| Fischer, Martin |
NanoBuild – concepts and requirements of nano-to-meter scale build |
| Flemming, Christian |
Cost management in a collaborative management system - a 5D-approach |
| Flemming, Ingo |
Cost management in a collaborative management system - a 5D-approach |
| Flood, Ian |
A new method for very fast simulation of blast wave propagation in complex built environments |
| Flowers, David |
A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure |
| Francis, Adel |
Dynamic production-based relationships between activities for construction projects' planning |
| Fröbel, Toni |
Formalisation and assessment of data structure based coupling in distributed civil engineering applications |
| Fruchter, Renate |
Cross-disciplinary AEC teamwork supported by re-representation |
| Fruchter, Renate |
From learning to space |
| Fukuda, Tomohiro |
Development of an accurate positioning method for augmented reality using multiple markers |
| Funamoto, Satoshi |
A study on traffic accident measures in municipal roads by using GIS |
|
|
| Gadi, Mohamed |
Calculating direct solar radiation on vaulted roofs using a new computer technique |
| Gadi, Mohamed |
Intensity of solar radiation on convex walls using a new computerized tool |
| Galishnikova, Vera |
Nonlinear numerical stability analysis of space trusses |
| Gao, Yang |
Using artificial intelligence to deliver optimised energy consumption |
| Gao, Zhili |
Using building information modeling for measuring the efficiency of building energy performance |
| Garrett, James H. |
A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing |
| Garrett, James H. |
Requirements for a computerized approach to plan sensor placement in the HVAC systems |
| Garrett, James H. |
Analysis of three indoor localization technologies to support facility management field activities |
| Garrett, James H. |
Potential utilization of building information models for planning maintenance activities |
| Garrett, James H. |
A future challenge for informatics: harnessing massive operational and condition data to better manage the infrastructure life-cycle |
| Geng, Yan |
DEM simulation of cylindrical cavity expansion in granular material |
| Gerami, Mohsen |
Evaluation of cyclic response of RBS connection including panel zone effects |
| Gerami, Mohsen |
Nonlinear behavior Of RBS connections in steel moment frames |
| German, Stephanie |
Visual recognition and assessment of concrete crack properties |
| Gerold, Fabian |
Integrative structural design |
| Gershenzon, Vladimir |
Remote sensing technologies for infrastructure management: Russian experience |
| Geyer, Philipp |
An integrative approach for using multidisciplinary design optimization in AEC |
| Ghaznavi Oskoei, Amin |
Evaluation of cyclic response of RBS connection including panel zone effects |
| Ghaznavi Oskoei, Amin |
Nonlinear behavior Of RBS connections in steel moment frames |
| Giel, Brittany |
Return on investment analysis of building information modeling in construction |
| Ginzburg, Alexander |
Organizational and technological reliability of construction companies |
| Gokce, Umut |
Information modelling for building maintenance using mobile clients |
| Golparvar-Fard, Mani |
Model-based detection of progress using D4AR models generated by daily site photologs and building information models |
| Golparvar-Fard, Mani |
Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models |
| Gong, Jie |
A computer vision and reasoning based video interpretation system for rapid productivity analysis of construction operations |
| Goulding, Jack |
Strategic positioning of IT in construction: the way forward |
| Goulding, Jack |
Achieving IT-based sustainable competitive advantage in construction: organisational soft issues |
| Granholm, Leif |
Towards interoperable open digital building information models |
| Günthner, Willibald A. |
3D-Planning of construction site equipment based on process simulation |
| Gursel, Ipek |
Supporting performance data acquisition and analysis for corporate public real estate management |
|
|
| Hadianfard, Mohammad Ali |
Advanced nonlinear time-history analysis of partially restrained steel frames by using integrated equations of motion |
| Halighongde, Shankar |
Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems |
| Hall, Christian |
Evolution of a construction graphics course for engineering education |
| Halman, Johannes |
A process-based framework for modelling risk-related failure costs in construction |
| Halman, Johannes |
A computer model for assessing project risks and occurrence of failure costs |
| Halman, Johannes |
Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives |
| Ham, Sung-il |
Space-connector model for representing spatial relations in a quantitative space analysis |
| Hamad, Waleed |
Modelling the nonlinear behaviour of a cracked reinforced concrete beam |
| Hamm, Matthias |
Constraint-based multi-objective optimization of construction schedules |
| Hammad, Amin |
Improving construction safety through real-time motion planning of cranes |
| Hammad, Amin |
Role-based access to facilities lifecycle information on RFID tags |
| Hammad, Amin |
Feasibility of location tracking of construction resources using UWB for better productivity and safety |
| Hammad, Amin |
Design criteria of wireless sensors in structural health monitoring systems |
| Han, Charles S. |
Web-enabled model-based CAD for design |
| Han, SangUk |
Framework for a resilience system in safety management: a simulation and visualization approach |
| Hara, Takashi |
Design, analysis and application of moving scaffold to the structural maintenance |
| Harrison, Catherine |
Successful education: the key to engineering creativity |
| Hartmann, Dietrich |
Agent-oriented development of hybrid wind turbine monitoring systems |
| Hartmann, Timo |
Comparing structure-based and function-based user interfaces for traffic simulation |
| Harty, Chris |
Implementing building information modelling: a case study of the Barts and the London hospitals |
| Häubi, Fritz |
Process oriented model based information exchange between architecture and fabrication in early project phases |
| Hawileh, Rami |
Energy-based predictions of number of reversals to fatigue failure of steel bars using artificial neural network |
| Hayashi, Yoshitugu |
Automatic generation of 3-d building models from multiple bounded polygons |
| Hazrati, Ayoub |
Evaluation of construction contractors in developing countries using fuzzy SAW method |
| He, Yonglong |
Simulations on cross-ties for vibration control of long span cable-stayed bridges |
| Heinisuo, Markku |
Integration of joint design of steel structures using product model |
| Hejazi, Farzad |
Coupling parallel buildings by supplemental viscous damper device |
| Hilbert, Frank |
Dynamic context-aware information access in virtual organizations |
| Hironobu, Haishima |
Preliminary inspection about the profit of 3D data in public works |
| Ho, Ting-Wu |
Pavement distress image recognition using k-means and classification algorithms |
| Hogg, Keith |
Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment |
| Holland, Robert J. |
BIM collaboration across six disciplines |
| Horenburg, Tim |
3D-Planning of construction site equipment based on process simulation |
| Hou, Lei |
A novel application in guiding assembly task: augmented reality animation |
| Howard, Elizabeth |
Evolution of a construction graphics course for engineering education |
| Howard, Elizabeth |
Impact of gaming application use in construction engineering education |
| Hsieh, Shang-Hsien |
Experiences using building information modeling for a construction project |
| Hsieh, Shang-Hsien |
SimuSurvey X : an improved virtual surveying instrument running off a game engine |
| Hsieh, Shang-Hsien |
On effective passage partitioning for information retrieval on domain-specific technical reports |
| Hsieh, Yo-Ming |
An interactive 3D visualization system for displaying field-monitoring data |
| Hu, Zhenzhong |
Development of a sub building information model for 4D structural safety analysis during construction |
| Hua, Bingcan |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Huang, Chudong |
An integration framework of arch bridge modeling for testing analysis |
| Huang, Chudong |
Research on collapse simulation of Dixituojiang bridge |
| Huang, Hongwei |
Simulations on cross-ties for vibration control of long span cable-stayed bridges |
| Hubers, Hans |
IFC based BIM or parametric design? |
| Huhnt, Wolfgang |
Visualization of construction process models |
| Hung, Shih-Lin |
The study of combining hive-grid target with sub-pixel analysis for measurement of structural experiment |
| Hunt, Hugh |
An efficient formulation for calculating the vibration response of piled foundations due to excitation by an underground railway |
| Hunt, Hugh |
Simulating ground vibration from underground railways through subsiding soil layers |
| Hunt, Hugh |
Simple, yet puzzling, problems in vibration |
| Hussein, Mohammed |
Modelling the nonlinear behaviour of a cracked reinforced concrete beam |
| Hussein, Mohammed |
Modelling vibration from surface and underground railways as an evolutionary random process |
| Hussein, Mohammed |
Dynamic response of a laterally-loaded infinite rigid cylinder embedded in a saturated poroelastic medium |
| Hyari, Khaled |
Optimization of highway construction work zones: the agency and user cost tradeoff |
| Hyde, Tom |
Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems |
|
|
| Ibrahim, Rahinah |
Cognitive transformation mediated by VR 3D sketching during conceptual architectural design process |
| Irizarry, Javier |
Mobile application for land study using geographic information systems |
| Issa, R. Raymond A. |
Feasibility of integrating building information modeling and LEED® certification process |
| Issa, R. Raymond A. |
Factors influencing the adoption of building information modeling in the AEC Industry |
| Issa, R. Raymond A. |
Web-based on-demand information extraction system for building information models |
| Issa, R. Raymond A. |
Return on investment analysis of building information modeling in construction |
| Issa, R. Raymond A. |
Ultrasonic sensor + 4D virtual reality simulation environment for safety training |
| Izzuddin, Bassam |
Practical software design for engineering application development |
|
|
| Jaafar, Mohd Saleh |
Coupling parallel buildings by supplemental viscous damper device |
| Jallow, Abdou Karim |
An integrated requirements management system for construction projects |
| Javadi, Akbar |
An evolutionary numerical approach to modelling the mechanical properties of rubber concrete |
| Javadi, Akbar |
Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study |
| Javadi, Akbar |
Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model |
| Jeffrey, Howard |
Implementing building information modelling: a case study of the Barts and the London hospitals |
| Ji, Sae-Hyun |
Similarity measurement method of case-based reasoning for conceptual cost estimation |
| Ji, Yang |
Mathematical modeling of earthwork optimization problems |
| Jian, Chen-you |
Applying artificial neural networks to estimate the amount of chlorine in air |
| Jiang, Ruijuan |
A general finite strip for the analysis of folded plates |
| Jones, Huw |
Combined strategy for efficient collision detection in 4D planning applications |
| Jones, Simon |
Simulating ground vibration from underground railways through subsiding soil layers |
| Jones, Stephen |
Combined strategy for efficient collision detection in 4D planning applications |
| Jung, Tae-Hwan |
Tag-Manager Based Document Management Prototype System of Building Material Information |
| Jung, Youngsoo |
Automated progress measurement and management in construction: variables for theory and implementation |
|
|
| Kagan, Pavel |
Tall building construction: some aspects of planning and organization |
| Kageyama, Teruaki |
Preliminary inspection about the profit of 3D data in public works |
| Kagioglou, Mike |
The key performance indicators of the BIM implementation process |
| Kamat, Vineet |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Kandil, Amr |
Contractual document process model for document management |
| Kandil, Amr |
Automated outcome prediction model for differing site conditions through support vector machines |
| Kandil, Amr |
Optimization of highway construction work zones: the agency and user cost tradeoff |
| Kang, LeenSeok |
Development of a workspace conflict verification model for temporary facilities based on a VR simulation |
| Kang, Shih-Chung |
Experiences using building information modeling for a construction project |
| Kang, Shih-Chung |
A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments |
| Kang, Shih-Chung |
SimuSurvey X : an improved virtual surveying instrument running off a game engine |
| Kang, Youngcheol |
Assessing the benefits and hindrances of information integration opportunities |
| Kao, Catherine |
A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments |
| Karczewski, Björn |
Physical nonlinear model identification in model-based long-term structural health monitoring |
| Kartamysheva, Alexandra |
GIS and territorial planning |
| Kassim, Yahuza |
A non-parametric algorithm for computing information technology induced productivity in the construction value chain |
| Katranuschkov, Peter |
Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects |
| Katranuschkov, Peter |
Dynamic context-aware information access in virtual organizations |
| Katsunori, Miyamoto |
Preliminary inspection about the profit of 3D data in public works |
| KAWASE, Shunya |
Optimization system for facility placement in residential areas using multi-objective genetic algorithms |
| Kazakov, Konstantine |
Combined strategy for efficient collision detection in 4D planning applications |
| Keith, Douglas |
Virtual Reality for learning construction surveying |
| Kessler, Stephan |
3D-Planning of construction site equipment based on process simulation |
| Khamavova, Albina |
GIS and territorial planning |
| Khan, Muhammad Ali |
Quantitative quality assessment of network-based schedules |
| Khosrowshahi, Farzad |
Strategic positioning of IT in construction: the way forward |
| Khosrowshahi, Farzad |
A preliminary framework for research in spatial data sharing |
| Kilian, Axel |
Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight |
| Kim, Hyunjoo |
Developing energy efficient building design in machine learning |
| Kim, Yong-Woo |
Multi-objective optimization of process design using process-based sustainable impact analysis |
| Kirkegaard, Poul Henning |
Evaluation of BIM and Ecotect for conceptual architectural design analysis |
| Kislitsyn, Dmitriy |
Distributed computing for construction project design by division into project design units |
| Kiziltas, Semiha |
A model-based and RFID integrated approach to streamline component information flow in construction projects |
| Koch, Christian |
Formalisation and assessment of data structure based coupling in distributed civil engineering applications |
| Koch, Christian |
Experiences from the application of processing-oriented building information in a CAD-based environment |
| Koenig, Markus |
Constraint-based multi-objective optimization of construction schedules |
| Koike, Hirotaka |
A study on traffic accident measures in municipal roads by using GIS |
| Koike, Hirotaka |
A study on effects of providing environmental information using three dimensional computer graphics |
| König, Markus |
Simulation of construction processes considering spatial constraints of crane operations |
| Konukcu, Selda |
An evaluation of the fire safety emergency cover toolkit |
| Koo, Kyo-Jin |
Tag-Manager Based Document Management Prototype System of Building Material Information |
| Korkmaz, Sinan |
Self-repair of a tensegrity pedestrian bridge through grouped actuation |
| Korzhun, Andrey |
Ways to automate of process of optimal design decisions generation in the multicriteria optimization conditions |
| Koskela , Lauri |
The key performance indicators of the BIM implementation process |
| Kouchmeshki, Kaveh |
Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm |
| Kovacevic, Milos |
Topic specific search engines in civil engineering |
| Kripakaran, Prakash |
Structural identification through continuous monitoring: data cleansing using temperature variations |
| Krueger, Denise |
Development of network-level linear programming optimization for pavement maintenance programming |
| Kuang, J S |
Effect of out-of-plane loading on in-plane behaviour of unreinforced infilled RC frames |
| Kubota, Satoshi |
4D Information Management System for Road Maintenance Using GIS |
| Kulathunga, D D T K |
Buckling of defective carbon nanotube |
| Kulikova, Ekaterina |
Construction of the e-learning training complex: structure, parameters and functional possibilities of the courses |
| Kumar, Bimal |
Web-enabled model-based CAD for design |
| Kumar, Bimal |
Cloud computing and its implications for construction IT |
| Kuo, Kirsty |
An efficient formulation for calculating the vibration response of piled foundations due to excitation by an underground railway |
| Kwak, Hyo-gyoung |
Development of nonlinear model for slender concrete in-filled steel tube column |
| Kwak, Ji-hyun |
Development of nonlinear model for slender concrete in-filled steel tube column |
| Kwan, A |
Gains and losses of information when collaborating remotely over a network communication in the construction industry |
|
|
| Laasonen, Mauri |
Integration of joint design of steel structures using product model |
| Laasonen, Mauri |
Data exchange from BIM to building-use simulation |
| Lai, Jihn-Sung |
A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments |
| Lamb, Julian |
Fuzziness and randomness ‘a hybrid approach’ to risk management |
| Laofor, Chollada |
Development of system and algorithm for evaluating defect level in architectural work |
| Laory, Irwanda |
Structural identification through continuous monitoring: data cleansing using temperature variations |
| Lau, Shing-Tak Douglas |
Re-entrant area studies using computational fluid dynamics |
| Law, Kincho H. |
Web-enabled model-based CAD for design |
| Lee, Bill L.P. |
A wireless climatic information system for construction sites |
| Lee, Bill L.P. |
A web-based academic records tracking system for outcome-based education |
| Lee, Chijoo |
Economic Impact of Safety Improvement by a Rotation-controllable Tower-crane Hook Block |
| Lee, Ghang |
Economic Impact of Safety Improvement by a Rotation-controllable Tower-crane Hook Block |
| Lee, Ghang |
Identifying the consideration factors for successful BIM projects |
| Lee, Ghang |
Space-connector model for representing spatial relations in a quantitative space analysis |
| Lee, Hyun-Soo |
Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM |
| Lee, Hyun-Soo |
Similarity measurement method of case-based reasoning for conceptual cost estimation |
| Lee, Sanghoon |
The virtual construction simulator - development of an educational simulation game |
| Lee, SangHyun |
Framework for a resilience system in safety management: a simulation and visualization approach |
| Lee, SangHyun |
Enhanced estimation of air emissions from construction operations based on discrete-event simulation |
| Lee, Sookyong |
Automated progress measurement and management in construction: variables for theory and implementation |
| Lee, Tim Hau |
A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments |
| Leung, Arthur W.T. |
Assessing the impacts of spatial profile on site production using clustering techniques |
| Li, Ding |
Research on 4D virtual construction and dynamic management system based on BIM |
| Li, Ding |
A research on coupling prediction model for multi-disaster |
| Li, Haijiang |
The application of intelligent agency in a software model for buildings |
| Li, Huaxiang |
Shakedown analysis of soil materials based on an incremental approach |
| Li, Hui |
Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes |
| Li, Ming |
The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs |
| Li, Nan |
Exploring the use of wireless sensor networks in building management |
| Li, Shuchun |
Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns |
| Li, Wanheng |
Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW |
| Li, Wanheng |
The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs |
| Li, Yungui |
A software platform for information conversion from IFC-based architectural model to PKPM structural model |
| Limsupreeyarat, Petcharat |
Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality |
| Lin, Chia-Ying |
Development of an online exam platform for the programming language course: ontology-based approach |
| Lin, Hsien-Tang |
On effective passage partitioning for information retrieval on domain-specific technical reports |
| Lin, Jyh-Dong |
Pavement distress image recognition using k-means and classification algorithms |
| Lin, Ken-Yu |
An operational model for locating and sharing online learning resources – using construction safety as an example |
| Lin, Lee-kuo |
System development and performance evaluation of track intrusion in Taipei MRT system |
| Lin, Lee-kuo |
Applying artificial neural networks to estimate the amount of chlorine in air |
| Lin, Yang |
A video game-based training mode for decision making in construction project control and management |
| Lin, Zhidan |
Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes |
| Little, Andrew P.F. |
Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure |
| Little, Andrew P.F. |
Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure |
| Little, Andrew P.F. |
Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure |
| Little, Andrew P.F. |
A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure |
| Little, Andrew P.F. |
Composite tubing collapse under uniform external hydrostatic pressure |
| Liu, Rui |
Factors influencing the adoption of building information modeling in the AEC Industry |
| Liu, Wenpeng |
Durability evaluation software system of concrete structure based on BIM and 4D technology |
| Liu, Xuesong |
Requirements for a computerized approach to plan sensor placement in the HVAC systems |
| Liu, Zhaoqiu |
A software platform for information conversion from IFC-based architectural model to PKPM structural model |
| Loh, Eugene |
Cost effective refurbishment approach to achieve energy efficient building: a primary school case study |
| Loh, Eugene |
Energy profiling: supporting performance based approaches in sustainable building design |
| Long, Gavin |
Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring |
| Long, Gavin |
Simulation for education in construction and construction management - IT or not IT |
| Lou, Eric Choen Weng |
Achieving IT-based sustainable competitive advantage in construction: organisational soft issues |
| Lou, Eric Choen Weng |
Strategic positioning of IT in construction: the way forward |
| Lu, Chiao-Yun |
A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments |
| Lu, Jianming |
An integration framework of arch bridge modeling for testing analysis |
| Lu, Jianming |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
| Lu, Jianming |
The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs |
| Lu, Jianming |
Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW |
| Lu, Ming |
Evaluation of photogrammetry for monitoring settlement of building adjacent to foundation jobsite |
| Lu, Ning |
Approach to representing information resources in construction firms by using IFC based on object-oriented method |
| Lu, Tao |
Numerical simulation of the influence of pavement stiffness on energy dissipation |
| Lu, Xiao |
A preliminary study on the application of computer simulation in the progressive collapse of bridges |
| Lu, Xilin |
A software platform for information conversion from IFC-based architectural model to PKPM structural model |
| Lu, Xinzheng |
A preliminary study on the application of computer simulation in the progressive collapse of bridges |
| Lu, Xinzheng |
Development of a sub building information model for 4D structural safety analysis during construction |
| Lu, Ya-Sue |
An interactive 3D visualization system for displaying field-monitoring data |
| Lu, Yung-Chi |
The study of combining hive-grid target with sub-pixel analysis for measurement of structural experiment |
| Lund Jensen, Rasmus |
Evaluation of BIM and Ecotect for conceptual architectural design analysis |
|
|
| Ma, Zhiliang |
Approach to representing information resources in construction firms by using IFC based on object-oriented method |
| Mahfouz, Tarek |
Automated outcome prediction model for differing site conditions through support vector machines |
| Mak, Stephen |
A wireless climatic information system for construction sites |
| Mak, Stephen |
A web-based academic records tracking system for outcome-based education |
| Makanae, Koji |
Application of 3D terrain representation system for highway landscape design |
| Manjia, Marcelline |
An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon |
| Manzoor, Farhan |
Integration of radio frequency identification and building information modelling for decentralised information management |
| Maravas, Alexander |
A study of cash flows in projects with fuzzy activity durations |
| Marx, Arnim |
Simulation of construction processes considering spatial constraints of crane operations |
| Masakazu, Kawakami |
Preliminary inspection about the profit of 3D data in public works |
| Mashina, Giamal |
Calculating direct solar radiation on vaulted roofs using a new computer technique |
| Mashina, Giamal |
Intensity of solar radiation on convex walls using a new computerized tool |
| Matin Md, A. |
Experiences using building information modeling for a construction project |
| Matthews, H. Scott |
Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms |
| Matveyo, Roman |
GIS and territorial planning |
| Mawdesley, Michael |
Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring |
| Mawdesley, Michael |
A genetic algorithm approach to highway alignment development |
| Mawdesley, Michael |
Using genetic algorithms to assist in the design of a water distribution network |
| Mawdesley, Michael |
Simulation for education in construction and construction management - IT or not IT |
| McCullouch, Bob |
A paperless, all digital engineering design class |
| McDowell , Glenn |
DEM simulation of cylindrical cavity expansion in granular material |
| McGibbney, Lewis |
Cloud computing and its implications for construction IT |
| Mehravar, Moura |
Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model |
| Meng, Cunxi |
Study and key technology of computer application integration in railway survey and design |
| Menzel, Karsten |
Using artificial intelligence to deliver optimised energy consumption |
| Menzel, Karsten |
Model-based estimation of rooms’ energy consumption in building with renewable energy sources |
| Menzel, Karsten |
Information modelling for building maintenance using mobile clients |
| Menzel, Karsten |
Building performance analysis based on modelling and simulation |
| Menzel, Karsten |
Integration of radio frequency identification and building information modelling for decentralised information management |
| Messner, John I. |
BIM collaboration across six disciplines |
| Messner, John I. |
The virtual construction simulator - development of an educational simulation game |
| Michaelidou-Kamenou, Anastasia |
An entropy-based method for resource levelling |
| Mikami, Ichizou |
4D Information Management System for Road Maintenance Using GIS |
| Milani, Enrico |
Kinematic FE limit analysis homogenization model for masonry walls reinforced with continuous GFRP grids |
| Milani, Gabriele |
Kinematic FE limit analysis homogenization model for masonry walls reinforced with continuous GFRP grids |
| Miles, John |
The application of intelligent agency in a software model for buildings |
| Miles, John |
Gains and losses of information when collaborating remotely over a network communication in the construction industry |
| Miresco, Edmond |
Dynamic production-based relationships between activities for construction projects' planning |
| Mochinaga, Daisuke |
Fundamental research on the optimal display of digital map according to scales based on the space perception |
| Mohamed, Sherif |
Input-output impact risk propagation in critical infrastructure interdependency |
| Mondragon, Fernando |
Understanding our students: a technology and construction baseline survey |
| Monobe, Kantaro |
Fundamental research on the optimal display of digital map according to scales based on the space perception |
| Moon, HyounSeok |
Development of a workspace conflict verification model for temporary facilities based on a VR simulation |
| Moore, Thomas |
NanoBuild – concepts and requirements of nano-to-meter scale build |
| Morimoto, Akinori |
A study on effects of providing environmental information using three dimensional computer graphics |
| Morimoto, Akinori |
A study on traffic accident measures in municipal roads by using GIS |
| Motamedi, Ali |
Role-based access to facilities lifecycle information on RFID tags |
| Mourshed, Monjur |
Luminaire position optimisation using radiance based simulation: a test case of a senior living room |
| Mourshed, Monjur |
Optimisation of a daylight-window: hospital patient room as a test case |
| Mousavi Nezhad, Mohaddeseh |
Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study |
| Müller, Marina Figueiredo |
A modeling level-oriented approach for Building Information Modeling |
| Muminova, Svetlana |
Tall building construction: some aspects of planning and organization |
| Muthukumar, S. |
Mobile application for land study using geographic information systems |
| Mutis, Ivan |
Understanding technology in learning settings based on structurational analysis |
|
|
| Nakamura, Kenji |
Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life |
| Nassar, Khaled |
Daylight as an evolutionary architectural form finder |
| Nassar, Khaled |
New advances in the automated architectural space plan layout problem |
| Nassar, Khaled |
A simplified model for the interactive generation of architectural space layout |
| Nassar, Khaled |
Schedule network complexity versus project complexity |
| Nel, W |
Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment |
| Neto, Pedro |
Engaging learners inside and outside the classroom |
| Nguyen, Tang-Hung |
Using building information modeling for measuring the efficiency of building energy performance |
| Nguyen, Thuy |
Understanding our students: a technology and construction baseline survey |
| Nham, Nguyen Van |
A study on traffic accident measures in municipal roads by using GIS |
| Nikolic, Dragana |
The virtual construction simulator - development of an educational simulation game |
| Nisbet, Nicholas |
Analysis of life-cycle information exchange |
| Noorzaei, Jamaloddin |
Coupling parallel buildings by supplemental viscous damper device |
| Nour, Mohamed |
Object versioning as a basis for design change management within a BIM context |
|
|
| O'Brien, William |
Understanding our students: a technology and construction baseline survey |
| O'Brien, William |
Assessing the benefits and hindrances of information integration opportunities |
| O'Brien, William |
A decision support tool for subcontractor multi-project resource allocation |
| O'Connor, James |
Assessing the benefits and hindrances of information integration opportunities |
| O'Reilly, Karen |
The key performance indicators of the BIM implementation process |
| Obonyo, Esther |
The multi agent paradigm and organizational abstractions in construction e-business |
| Ojeda, Lauro |
Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications |
| Olbina, Svetlana |
Factors influencing the adoption of building information modeling in the AEC Industry |
| Olbina, Svetlana |
Web-based on-demand information extraction system for building information models |
| Olbina, Svetlana |
Return on investment analysis of building information modeling in construction |
| Osman, Ashraf |
Dynamic response of a laterally-loaded infinite rigid cylinder embedded in a saturated poroelastic medium |
| Ota, Naoki |
Development of an accurate positioning method for augmented reality using multiple markers |
| Otani, Kazufumi |
Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life |
| Oti, Akponanabofa Henry |
Developing incentives for collaboration in the AEC Industry |
| Owen, John |
Modelling the nonlinear behaviour of a cracked reinforced concrete beam |
| Owusu, Albert |
Input-output impact risk propagation in critical infrastructure interdependency |
|
|
| Pahl, Peter Jan |
The influence of theories on the quality of computer models |
| Palmer, Mark E. |
A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing |
| Pan, Wei |
Climate change risks in decision-making in building design and facilities management |
| Pan, Wenjia |
Enhanced estimation of air emissions from construction operations based on discrete-event simulation |
| Pantouvakis, John-Paris |
A study of cash flows in projects with fuzzy activity durations |
| Park, Hyung-Jin |
Tag-Manager Based Document Management Prototype System of Building Material Information |
| Park, Moonseo |
Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM |
| Park, Moonseo |
Similarity measurement method of case-based reasoning for conceptual cost estimation |
| Parry, Tony |
Numerical simulation of the influence of pavement stiffness on energy dissipation |
| Patterson, Dan |
Schedule metric analysis: a formalized approach to more realistic planning... |
| Peansupap, Vachara |
Development of system and algorithm for evaluating defect level in architectural work |
| Peña-Mora, Feniosky |
The calculation of optimal premium in pricing ADR as an insurance product |
| Peña-Mora, Feniosky |
Model-based detection of progress using D4AR models generated by daily site photologs and building information models |
| Peña-Mora, Feniosky |
Framework for a resilience system in safety management: a simulation and visualization approach |
| Peña-Mora, Feniosky |
Automation for construction equipment request and deployment for emergency response |
| Peña-Mora, Feniosky |
Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models |
| Peña-Mora, Feniosky |
Enhanced estimation of air emissions from construction operations based on discrete-event simulation |
| Peng, Weibing |
An integration framework of arch bridge modeling for testing analysis |
| Peng, Weibing |
Research on collapse simulation of Dixituojiang bridge |
| Petronijevic, Predrag |
Topic specific search engines in civil engineering |
| Pettang, Chrispin |
An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon |
| Pihlak, Madis |
BIM collaboration across six disciplines |
| Pitrakkos, Theodoros |
Pull-out behaviour of anchored blind-bolt: a component based approach |
| Ploennigs, Joern |
Model-based estimation of rooms’ energy consumption in building with renewable energy sources |
| Poerschke, Ute |
BIM collaboration across six disciplines |
| Poh, Leong Hien |
Implicit gradient-enhanced strain softening material models |
| Pour Rahimian, Farzad |
Cognitive transformation mediated by VR 3D sketching during conceptual architectural design process |
| Pourazima, Hassan |
Mobile application for land study using geographic information systems |
| Pradhan, Anu |
An approach for fusing data from multiple sources to support construction productivity monitoring |
| Price, Andrew |
Luminaire position optimisation using radiance based simulation: a test case of a senior living room |
| Price, Andrew |
Optimisation of a daylight-window: hospital patient room as a test case |
|
|
| Qari, Azzam |
Towards a formal axiology for sustainable infrastructure development |
| Qi, Xueda |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
|
|
| Rafiq, Yaqub |
Intelligent computing for the design of high performance buildings |
| Rahnema, Hosein |
Advanced nonlinear time-history analysis of partially restrained steel frames by using integrated equations of motion |
| Rajaie, Hossein |
Evaluation of construction contractors in developing countries using fuzzy SAW method |
| Rakha, Tarek |
Daylight as an evolutionary architectural form finder |
| Rakha, Tarek |
Integration of daylighting simulation software in architectural education |
| Rank, Ernst |
Mathematical modeling of earthwork optimization problems |
| Raphael, Benny |
A non-parametric algorithm for computing information technology induced productivity in the construction value chain |
| Raphael, Benny |
Towards intelligent building systems: evaluating user acceptance of automatic control |
| Raps, Michael |
Process oriented model based information exchange between architecture and fabrication in early project phases |
| Rashidi, Abbas |
Evaluation of construction contractors in developing countries using fuzzy SAW method |
| Rebolj, Danijel |
NanoBuild – concepts and requirements of nano-to-meter scale build |
| Rebolj, Danijel |
InPro training environment – training platform for BIM based collaborative working |
| Reddy, J N |
Buckling of defective carbon nanotube |
| Redekop, David |
Free vibration of a magneto-electro-elastic toroidal shell |
| Ren, Aizhu |
Smoke assessment of building fire based on FDS and GIS |
| Ren, Aizhu |
A research on coupling prediction model for multi-disaster |
| Ren, Zhaomin |
The assessment of RFID facilitated construction material management system - a case study of water supply project |
| Rezania, Mohammad |
Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study |
| Rezgui, Yacine |
The application of intelligent agency in a software model for buildings |
| Richter, Sven |
Visualization of construction process models |
| Roberts, Gethin |
Monitoring the deflections of bridges in the UK by GPS |
| Rodriguez, Sonia |
Feasibility of location tracking of construction resources using UWB for better productivity and safety |
| Ronni, H |
Integration of joint design of steel structures using product model |
| Ross, Carl T.F. |
Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure |
| Ross, Carl T.F. |
Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure |
| Ross, Carl T.F. |
Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure |
| Ross, Carl T.F. |
Composite tubing collapse under uniform external hydrostatic pressure |
| Ross, Carl T.F. |
A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure |
| Ross, Eve |
A 3-D learning environment for teaching the collaboration to civil engineers |
| Rüppel, Uwe |
BIM-based immersive indoor graph networks for emergency situations in buildings |
| Rüppel, Uwe |
BIM-based virtual training environment for fire-fighters |
| Ruzika, Stefan |
Mathematical modeling of earthwork optimization problems |
|
|
| Sabry, Hanan |
Integration of daylighting simulation software in architectural education |
| Saini, Rakesh |
Role-based access to facilities lifecycle information on RFID tags |
| Salleh, Norzamni |
A preliminary framework for research in spatial data sharing |
| Sambo, Kari |
An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon |
| Sansour, Carlo |
Computational non-linear structural dynamics and energy-momentum integration schemes |
| Santos, Eduardo Toledo |
An overview of BIM specialists |
| Santos, Eduardo Toledo |
BIM teaching strategies: an overview of the current approaches |
| Santos, João |
Impact of the Eurocode 2 proposals for nonlinear analysis on lateral deformability and design of R.C. structures |
| Sarioletlagh Fard , Sahand |
Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm |
| Sariyildiz, Sevil |
Description of a methodology for decision support for energy efficient housing redesign |
| Sariyildiz, Sevil |
Supporting performance data acquisition and analysis for corporate public real estate management |
| Sariyildiz, Sevil |
Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight |
| Sasakawa, Kazuhiko |
Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency |
| Savarese, Silvio |
Model-based detection of progress using D4AR models generated by daily site photologs and building information models |
| Savarese, Silvio |
Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models |
| Schach, Rainer |
Cost management in a collaborative management system - a 5D-approach |
| Schapke, Sven-Eric |
Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects |
| Schatz, Kristian |
BIM-based virtual training environment for fire-fighters |
| Scheer, Sergio |
A modeling level-oriented approach for Building Information Modeling |
| Scheer, Sergio |
Building design teamwork supported by a collaborative CAD modeling process analysis |
| Scherer, Raimar |
Semi-automation of logical decisions in monitoring procedures to realize adaptive geotechnical construction methods |
| Scherer, Raimar |
Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects |
| Scherer, Raimar |
Dynamic context-aware information access in virtual organizations |
| Schmidt, Kathy |
Understanding our students: a technology and construction baseline survey |
| Schneider, Richard |
Developing energy efficient building design in machine learning |
| Schnellenbach-Held, Martina |
Physical nonlinear model identification in model-based long-term structural health monitoring |
| Scholtenhuis, L L olde |
Comparing structure-based and function-based user interfaces for traffic simulation |
| Schumann, Anika |
Predicting the desired thermal comfort conditions for shared offices |
| Scott, David |
Life-cycle costing analysis to assist design decisions: beyond 3D building information modelling |
| Scott, David |
Simulation for education in construction and construction management - IT or not IT |
| Seipp, Florian |
Mathematical modeling of earthwork optimization problems |
| Sekhar, Chandra |
Towards intelligent building systems: evaluating user acceptance of automatic control |
| Semenov, Vitaly |
Combined strategy for efficient collision detection in 4D planning applications |
| Shanableh, Abdullah |
Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates |
| Sharma, Shrikant |
People flow modelling in building design |
| Shaurette, Mark |
Simulation tools to support energy efficient retrofit of small commercial buildings |
| Sheina, Svetlana |
GIS and territorial planning |
| Shen, Zhenyuan |
An integrated finite strip solution for dynamic analysis of long span bridges |
| Sherif, Ahmed |
Integration of daylighting simulation software in architectural education |
| Sheriff, Abdullahi |
Developing a corporate information architecture: a case study |
| Shi, Wei |
Ultrasonic sensor + 4D virtual reality simulation environment for safety training |
| Shigidi, Abdalla M.T. |
Hydrologic analysis of digital elevation models using archydro extension |
| Shikder, Shariful |
Luminaire position optimisation using radiance based simulation: a test case of a senior living room |
| Shikder, Shariful |
Optimisation of a daylight-window: hospital patient room as a test case |
| Shimomura, K |
Design, analysis and application of moving scaffold to the structural maintenance |
| Shiu, Ruei-Shiue |
SimuSurvey X : an improved virtual surveying instrument running off a game engine |
| Shumeev, Victor |
GIS and territorial planning |
| Si, X.T. |
Effects of long-term time-dependent behaviour on dynamic properties of cable-stayed bridges |
| Siddiqui, Mohsin |
Quantitative quality assessment of network-based schedules |
| Siplon, Page |
Simulating port logistics operations using 3D visualization technology |
| Smarsly, Kay |
Agent-oriented development of hybrid wind turbine monitoring systems |
| Smith, Ian F.C. |
Structural identification through continuous monitoring: data cleansing using temperature variations |
| Smith, Ian F.C. |
Self-repair of a tensegrity pedestrian bridge through grouped actuation |
| Smith, Martin |
An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas |
| Smith, Martin |
Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring |
| Smith, Paul |
Composite tubing collapse under uniform external hydrostatic pressure |
| Soibelman, Lucio |
Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms |
| Soibelman, Lucio |
Analysis of three indoor localization technologies to support facility management field activities |
| Song, Jianyong |
Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW |
| Song, Jin-Kyu |
Neural network modelling of reinforced concrete beam shear capacity |
| Song, Liangliang |
Research on collapse simulation of Dixituojiang bridge |
| Song, Xinyi |
The calculation of optimal premium in pricing ADR as an insurance product |
| Sornsuriya, Kittisak |
Building information model for evaluating the building energy performance: a case study |
| Soujeri, Ebrahim |
An artificial neural network model for estimating the influence of change orders on project performance and dispute resolution |
| Stace, Rod |
A genetic algorithm approach to highway alignment development |
| Stack, Paul |
Information modelling for building maintenance using mobile clients |
| Stack, Paul |
Model-based estimation of rooms’ energy consumption in building with renewable energy sources |
| Stagg, Malcolm |
Implementing building information modelling: a case study of the Barts and the London hospitals |
| Stein, Peter |
NURBS solid modelling using an operator-based approach |
| Stouffs, Rudi |
Description of a methodology for decision support for energy efficient housing redesign |
| Stouffs, Rudi |
Representational programming for design analysis |
| Stouffs, Rudi |
Supporting performance data acquisition and analysis for corporate public real estate management |
| Stouffs, Rudi |
Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms |
| Stübbe, Kai |
BIM-based immersive indoor graph networks for emergency situations in buildings |
| Stumpf, Annette |
Developing energy efficient building design in machine learning |
| Sugihara, Kenichi |
Automatic generation of 3-d building models from multiple bounded polygons |
| Sun, Limin |
Simulations on cross-ties for vibration control of long span cable-stayed bridges |
| Suprun, Anatoliy |
Distributed computing for construction project design by division into project design units |
| Swaddiwudhipong, Somsak |
Implicit gradient-enhanced strain softening material models |
| Syed Mohsin, Sharifah |
Numerical modeling of fibre-reinforced concrete |
|
|
| Tah, J.H.M. |
An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon |
| Tah, J.H.M. |
Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction |
| Tah , J.H.M. |
Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle |
| Taha, Ahmad |
Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring |
| Tam, Chi Ming |
Assessing the impacts of spatial profile on site production using clustering techniques |
| Tanaka, Shigenori |
Fundamental research on the optimal display of digital map according to scales based on the space perception |
| Tanaka, Shigenori |
Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life |
| Taneja, Saurabh |
Analysis of three indoor localization technologies to support facility management field activities |
| Tang, Fangqin |
Smoke assessment of building fire based on FDS and GIS |
| Tangaramvong, Sawekchai |
Some engineering mechanics applications of mathematical programs with equilibrium constraints |
| Tani, Akinori |
Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency |
| Tani, Akinori |
Optimization system for facility placement in residential areas using multi-objective genetic algorithms |
| Tani, Akinori |
A building structural-performance monitoring system using RFID tag with sensors |
| Tantisevi, Kevin |
Building information model for evaluating the building energy performance: a case study |
| Tham, Kwok Wai |
Towards intelligent building systems: evaluating user acceptance of automatic control |
| Thanoon, W |
Coupling parallel buildings by supplemental viscous damper device |
| Thom, Nick |
Numerical simulation of the influence of pavement stiffness on energy dissipation |
| Thomas, Joyce |
Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models |
| Throssell, David |
Implementing building information modelling: a case study of the Barts and the London hospitals |
| Throssell, David |
Design, delivery, and maintenance - important issues with using BIM |
| Thuesen, Niels |
Evaluation of BIM and Ecotect for conceptual architectural design analysis |
| Tian, Wei |
Climate change risks in decision-making in building design and facilities management |
| Tin-Loi, Francis |
Some engineering mechanics applications of mathematical programs with equilibrium constraints |
| Tizani, Walid |
Pull-out behaviour of anchored blind-bolt: a component based approach |
| Tizani, Walid |
Modelling techniques of composite joints under cyclic loading |
| Tizani, Walid |
Developing incentives for collaboration in the AEC Industry |
| Tizani, Walid |
The face bending behaviour of concrete filled structural hollow sections |
| Tobin, Ena |
Information modelling for building maintenance using mobile clients |
| Tongthong, Tanit |
Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system |
| Tongthong, Tanit |
Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality |
| Toshimi, Nakayama |
Preliminary inspection about the profit of 3D data in public works |
| Toz, Gonul |
GIS based decision support system for health and safety management in linear projects |
| Tsai, Meng-Han |
Experiences using building information modeling for a construction project |
| Tsai, Yichang (James) |
A parallelized image polygon detection algorithm for road sign inventory |
| Tsai, Yichang (James) |
Simulating port logistics operations using 3D visualization technology |
| Tsai, Yichang (James) |
Developing An Intelligent Sign Asset Inventory System Using Image Processing |
| Tsou, Jin-Yeu |
Re-entrant area studies using computational fluid dynamics |
| Tu, Wan-Ting |
Lessons learned from a collapsed wind turbine tower in Taiwan |
| Tumwesigye, Emmanuel |
Using artificial intelligence to deliver optimised energy consumption |
| Tumwesigye, Emmanuel |
Building performance analysis based on modelling and simulation |
| Turrin, Michela |
Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight |
| Turrin, Michela |
Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms |
|
|
| Uchida, Sayaka |
A study on effects of providing environmental information using three dimensional computer graphics |
| Udeaja, Chika |
Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment |
| Ugaji, Motoki |
A building structural-performance monitoring system using RFID tag with sensors |
| Umare, Ketan |
A parallelized image polygon detection algorithm for road sign inventory |
| Underwood, Jason |
A non-parametric algorithm for computing information technology induced productivity in the construction value chain |
| Underwood, Jason |
Strategic positioning of IT in construction: the way forward |
| Usher, Colin |
The key performance indicators of the BIM implementation process |
|
|
| van Berlo, Léon |
IFC-based clash detection for the open-source BIMserver |
| Van Den Ham, Eric |
Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight |
| van den Helm, Pim |
IFC-based clash detection for the open-source BIMserver |
| van Hal, Anke |
Description of a methodology for decision support for energy efficient housing redesign |
| Varughese, Jinu |
People flow modelling in building design |
| Vatani Oskouei, Asghar |
Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm |
| Vinagre, João |
Impact of the Eurocode 2 proposals for nonlinear analysis on lateral deformability and design of R.C. structures |
| Volkov, Andrey |
General information models of intelligent building control systems |
| von Buelow, Peter |
Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms |
|
|
| Wakefield, Ronald |
A decision support tool for subcontractor multi-project resource allocation |
| Wang, Bingjian |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
| Wang, Congjun |
Performance analysis and design platform based on building information model |
| Wang, Congjun |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Wang, Guojian |
High-performance computing platform for architectural design |
| Wang, Guojian |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Wang, Guojian |
Performance analysis and design platform based on building information model |
| Wang, Juan |
Shakedown analysis of soil materials based on an incremental approach |
| Wang, Ting-Kwei |
A decision support tool for subcontractor multi-project resource allocation |
| Wang, Xiangyu |
A novel application in guiding assembly task: augmented reality animation |
| Wang, Xiaohong |
Free vibration of a magneto-electro-elastic toroidal shell |
| Wang, Yi |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
| Wang, Zhiyu |
Pull-out behaviour of anchored blind-bolt: a component based approach |
| Wang, Zhiyu |
Modelling techniques of composite joints under cyclic loading |
| Watson, Alastair |
Digital buildings: facing the challenges |
| Watson, Alastair |
BIM – a driver for change |
| Way, James |
Practical software design for engineering application development |
| Wen, Zhen |
High-performance computing platform for architectural design |
| Whittaker, Terry |
Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure |
| Whyte, Andrew |
Life-cycle costing analysis to assist design decisions: beyond 3D building information modelling |
| Williams, Bill |
Engaging learners inside and outside the classroom |
| Wilson, Nic |
Predicting the desired thermal comfort conditions for shared offices |
| Wimmer, Johannes |
3D-Planning of construction site equipment based on process simulation |
| Won, Jongsung |
Identifying the consideration factors for successful BIM projects |
| Wu, Cheng-Hua |
Experiences using building information modeling for a construction project |
| Wu, Dapeng |
IFC & OpenGL-based representation and development of 3D realistic model in virtual construction |
| Wu, Po-yen |
System development and performance evaluation of track intrusion in Taipei MRT system |
| Wu, Wei |
Feasibility of integrating building information modeling and LEED® certification process |
| Wu, Yiching |
Simulating port logistics operations using 3D visualization technology |
|
|
| Xie, Haiyan |
Ultrasonic sensor + 4D virtual reality simulation environment for safety training |
| Xu, Zhen |
Smoke assessment of building fire based on FDS and GIS |
| Xue, Xiaolong |
The assessment of RFID facilitated construction material management system - a case study of water supply project |
|
|
| Yabuki, Nobuyoshi |
Development of an integrated building and sensor data model with contextual data for data mining |
| Yabuki, Nobuyoshi |
Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system |
| Yabuki, Nobuyoshi |
Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality |
| Yabuki, Nobuyoshi |
Development of an accurate positioning method for augmented reality using multiple markers |
| Yamabe, Yuichiro |
Optimization system for facility placement in residential areas using multi-objective genetic algorithms |
| Yamabe, Yuichiro |
Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency |
| Yamabe, Yuichiro |
A building structural-performance monitoring system using RFID tag with sensors |
| Yamamoto, Yuhei |
Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life |
| Yang, Keun-Hyeok |
Neural network modelling of reinforced concrete beam shear capacity |
| Yang, Youngjun |
Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM |
| Ye, Lieping |
A preliminary study on the application of computer simulation in the progressive collapse of bridges |
| Ye, Yinghua |
Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns |
| Ye, Yinghua |
Durability evaluation software system of concrete structure based on BIM and 4D technology |
| Ye, Yinghua |
Nonlinear RC beam element model under combined action of axial compression, bending and shear |
| Yin, Hang |
Building performance analysis based on modelling and simulation |
| Yin, Hang |
Integration of radio frequency identification and building information modelling for decentralised information management |
| Yitmen, Ibrahim |
An artificial neural network model for estimating the influence of change orders on project performance and dispute resolution |
| Yoon, You-Sang |
Similarity measurement method of case-based reasoning for conceptual cost estimation |
| Yoshida, Yoshihiro |
Development of an integrated building and sensor data model with contextual data for data mining |
| Yu, Fangqiang |
IFC & OpenGL-based representation and development of 3D realistic model in virtual construction |
| Yu, Hai-Sui |
DEM simulation of cylindrical cavity expansion in granular material |
| Yu, Hai-Sui |
Shakedown analysis of soil materials based on an incremental approach |
| Yu, Yamei |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
| Yuen, Terry Y P |
Effect of out-of-plane loading on in-plane behaviour of unreinforced infilled RC frames |
| Yuksel, Orhan |
A comparative study for layout planning of temporary construction facilities: optimization by using ant colony algorithms |
| Yun, Su-Ho |
Tag-Manager Based Document Management Prototype System of Building Material Information |
|
|
| Zahran, El-Said |
An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas |
| Zakikhani, Sepideh |
Design criteria of wireless sensors in structural health monitoring systems |
| Zhang, Cheng |
Feasibility of location tracking of construction resources using UWB for better productivity and safety |
| Zhang, Cheng |
Improving construction safety through real-time motion planning of cranes |
| Zhang, Hanyi |
A software platform for information conversion from IFC-based architectural model to PKPM structural model |
| Zhang, Jianping |
Development of a sub building information model for 4D structural safety analysis during construction |
| Zhang, Jianping |
Research on 4D virtual construction and dynamic management system based on BIM |
| Zhang, Jianping |
A research on coupling prediction model for multi-disaster |
| Zhang, Jianping |
IFC & OpenGL-based representation and development of 3D realistic model in virtual construction |
| Zhang, Jinquan |
Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW |
| Zhang, Jinquan |
The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs |
| Zhang, Le |
Web-based on-demand information extraction system for building information models |
| Zhang, Xin |
Performance analysis and design platform based on building information model |
| Zhang, Xin |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Zhang, Yongli |
A research on coupling prediction model for multi-disaster |
| Zhang, Yu |
A technique of modeling local variation of laterally loaded masonry wall panels |
| Zhang, Yu |
Web-enabled model-based CAD for design |
| Zhang, Yunpeng |
Nonlinear RC beam element model under combined action of axial compression, bending and shear |
| Zhang, Yunpeng |
Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns |
| Zhao, An |
An integration framework of arch bridge modeling for testing analysis |
| Zhao, Jingsong |
Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils |
| Zhao, Yimin |
Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio |
| Zheng, Ding yang |
A general finite strip for the analysis of folded plates |
| Zhou, Guangchun |
A technique of modeling local variation of laterally loaded masonry wall panels |
| Zhou, Wei |
Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle |
| Zhou, Wei |
Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction |
| Zhou, Yagang |
Simulations on cross-ties for vibration control of long span cable-stayed bridges |
| Zhu, Bo |
Role-based access to facilities lifecycle information on RFID tags |
| Zhu, Zhenhua |
Visual recognition and assessment of concrete crack properties |
| Zolotov, Vladislav |
Combined strategy for efficient collision detection in 4D planning applications |
